Basic Authentication Deprecation in Exchange Online – September 2022 Update

exchange server header

One month from today, we’re going to start to turn off basic auth for specific protocols in Exchange Online for customers who use them.

Since our first announcement nearly three years ago, we’ve seen millions of users move away from basic auth, and we’ve disabled it in millions of tenants to proactively protect them.

We’re not done yet though, and unfortunately usage isn’t yet at zero. Despite that, we will start to turn off basic auth for several protocols for tenants not previously disabled.

Starting October 1st, we will start to randomly select tenants and disable basic authentication access for MAPI, RPC, Offline Address Book (OAB), Exchange Web Services (EWS), POP, IMAP, Exchange ActiveSync (EAS), and Remote PowerShell. We will post a message to the Message Center 7 days prior, and we will post Service Health Dashboard notifications to each tenant on the day of the change.

We will not be disabling or changing any settings for SMTP AUTH.

If you have removed your dependency on basic auth, this will not affect your tenant or users. If you have not (or are not sure), check the Message Center for the latest data contained in the monthly usage reports we have been sending monthly since October 2021. The data for August 2022 will be sent within the first few days of September.

What If You Are Not Ready for This Change?

We recognize that unfortunately there are still many tenants unprepared for this change. Despite multiple blog posts, Message Center posts, interruptions of service, and coverage via tweets, videos, conference presentations and more, some customers are still unaware this change is coming. There are also many customers aware of the deadline who simply haven’t done the necessary work to avoid an outage.

Our goal with this effort has only ever been to protect your data and accounts from the increasing number of attacks we see that are leveraging basic auth.

However, we understand that email is a mission-critical service for many of our customers and turning off basic auth for many of them could potentially be very impactful.

One-Time Re-Enablement

Today we are announcing an update to our plan to offer customers who are unaware or are not ready for this change.

When we turn off basic auth after October 1st, all customers will be able to use the self-service diagnostic to re-enable basic auth for any protocols they need, once per protocol. Details on this process are below.

Once this diagnostic is run, basic auth will be re-enabled for those protocol(s). Selected protocol(s) will stay enabled for basic auth use until end of December 2022. During the first week of calendar year 2023, those protocols will be disabled for basic auth use permanently, and there will be no possibility of using basic auth after that.

Avoiding Disruption

If you already know you need more time and wish to avoid the disruption of having basic auth disabled you can run the diagnostics during the month of September, and when October comes, we will not disable basic for protocol(s) you specify. We will disable basic for any non-opted-out protocols, but you will be able to re-enable them (until the end of the year) by following the steps below if you later decide you need those too.

In other words – if you do not want basic for a specific protocol or protocols disabled in October, you can use the same self-service diagnostic in the month of September. Details on this process below.

Diagnostic Options

Thousands of customers have already used the self-service diagnostic we discussed in earlier blog posts (here and here) to re-enable basic auth for a protocol that had been turned off, or to tell us not to include them in our proactive protection expansion program. We’re using this same diagnostic again, but the workflow is changing a little.

Today, we have archived all prior re-enable and opt-out requests. If you have previously opted out or re-enabled basic for some protocol, you’ll need to follow the steps below during the month of September to indicate you want us to leave something enabled for basic auth after Oct 1.

To invoke the self-service diagnostic, you can go directly to the basic auth self-help diagnostic by simply clicking on this button (it’ll bring up the diagnostic in the Microsoft 365 admin center if you’re a tenant Global Admin):


Or you can open the Microsoft 365 admin center and click the green Help & support button in the lower right-hand corner of the screen.



When you click the button, you enter our self-help system. Here you can enter the phrase “Diag: Enable Basic Auth in EXO

Customers with tenants in the Government Community Cloud (GCC) are unable to use the self-service diagnostic covered here. Those tenants may opt out by following the process contained in the Message Center post sent to their tenant today. If GCC customers need to re-enable a protocol following the Oct 1st deadline they will need to open a support ticket.

Opting Out

During the month of September 2022, the diagnostic will offer only the option to opt-out. By submitting your opt-out request during September, you are telling us that you do not want us to disable basic for a protocol or protocols during October.  Please understand we will be disabling basic auth for all tenants permanently in January 2023, regardless of their opt-out status.

The diagnostic will show a version of the dialog below, and you can re-run it for multiple protocols. It might look a bit different if some protocols have already been disabled. Note too that protocols are not removed from the list as you opt-out but rest assured (unless you receive an error) we will receive the request.


Re-Enabling Basic for protocols

Starting October 1, the diagnostic will only allow you to re-enable basic auth for a protocol that it was disabled for.

If you did not opt-out during September, and we disabled basic for a protocol you later realize you need, you can use this to re-enable it.


Within an hour (usually much sooner) after you run the diagnostics and ask us to re-enable basic for a protocol, basic auth will start to work again.

At this point, we have to remind you that by re-enabling basic for a protocol, you are leaving your users and data vulnerable to security risks, and that we have customers suffering from basic auth-based attacks every single day (but you know that already).

Starting January 1, 2023, the self-serve diagnostic will no longer be available, and basic auth will soon thereafter be disabled for all protocols.

Summary of timelines and actions

Please see the following flow chart to help illustrate the changes and actions that you might need to take:


Blocking Basic Authentication Yourself

If you re-enable basic for a protocol because you need some extra time and then afterward no longer need basic auth you can block it yourself instead of waiting for us to do it in January 2023. The quickest and most effective way to do this is to use Authentication Policies which block basic auth connections at the first point of contact to Exchange Online.

Just go into the Microsoft 365 admin center, navigate to Settings, Org Settings, Modern Authentication and uncheck the boxes to block basic for all protocols you no longer need (these checkboxes will do nothing once we block basic for a protocol permanently, and we’ll remove them some time after January 2023).


Reporting Web Service Endpoint

For those of you using the Reporting Web Service REST endpoint to get access to Message Tracking Logs and more, we’re also announcing today that this service will continue to have basic auth enabled until Dec 31st for all customers, no opt-out or re-enablement is required. And, we’re pleased to be able to provide the long-awaited guidance for this too right here

EOP/SCC PowerShell

Basic authentication will remain enabled until Dec 31st, 2022. Customers need to migrate to certificate based authentication. Follow the Instructions here: App-only authentication

One Other Basic Authentication Related Update

We’re adding a new capability to Microsoft 365 to help our customers avoid the risks posed by basic authentication. This new feature changes the default behavior of Office applications to block sign-in prompts using basic authentication. With this change, if users try to open Office files on servers that only use basic authentication, they won’t see any basic authentication sign-in prompts. Instead, they’ll see a message that the file has been blocked because it uses a sign-in method that may be insecure.

You can read more about this great new feature here: Basic authentication sign-in prompts are blocked by default in Microsoft 365 Apps.

Office Team is looking for customers to opt-in to their Private Preview Program for this feature. Please send them an email if you are interested in signing up:


This effort has taken three years from initial communication until now, and even that has not been enough time to ensure that all customers know about this change and take all necessary steps. IT and change can be hard, and the pandemic changed priorities for many of us, but everyone wants the same thing: better security for their users and data.

Our customers are important to us, and we do not want to see them breached, or disrupted. It’s a fine balance but we hope this final option will allow the remaining customers using Basic auth to finally get rid of it.

The end of 2022 will see us collectively reach that goal, to Improve Security – Together.

The Exchange Team

Read full article (Microsoft Exchange Blog)

All content and images belong to their respected owners, this article is curated for informational purposes only.

Leave a Reply
Previous Post
Microsoft Security Header

Vulnerability Fixed in Azure Synapse Spark

Next Post
citrix logo header

Citrix Files for Mac – Restricted Special Characters

Related Posts